Sign in or
Lateral Lumbar Spine Radiography
The status of plain film radiography of the lumbar spine has changed in recent years. There is greater awareness of the relatively high radiation dose to the patient, the limitations of the plain film examination and the alternate imaging modalities. It is the responsibility of the radiographer to be aware of current best practice and to play the role of gate-keeper where appropriate. In spite of the limitations of plain film radiography of the lumbar spine, patients are still referred for plain film lumbar spine X-ray examinations, particularly in a trauma setting, and the radiographer has a duty to produce images of the highest quality.
The radiation dose to the patient associated with a routine lumbar spine X-ray examination is relatively high compared with other plain film X-ray examinations. It is the duty of the radiographer to minimise the radiation dose to the patient. The lumbar spine X-ray examination is one of the examinations that you could reasonably refuse to perform in cases of inappropriate indications on the basis of duty of care to the patient. A plain film X-ray examination of a woman of childbearing age, who is likely to be suffering from muscular pain, is below an acceptable standard of care. Seek the advice of a senior colleague if you consider that a lumbar spine X-ray examination referral is inappropriate. If you are the senior colleague, discuss the referral with the referring doctor to establish whether there are exceptional circumstances. If your institution has clinical pathways for back pain investigation, establish with the referring doctor if the case is within the guidelines. No female of child-bearing age should undergo lumbar spine radiography until their pregnancy status is clearly established.
A urine beta-HCG test should be undertaken prior to imaging if there is any change that the patient may be pregnant.
- If you are not pregnant, the test is negative
- If you are pregnant, the test is positive
AimoMoilanen1 , Marja-LiisaKokko1 and MaunuPitkänen
Issue Volume 9, Number 3 / February, 1983
December 10, 2004
The Finger Width Centring Technique
Adjusting the FFD/SID to suit the Patient Body Habitus
There is a tendency for the intervertebral disc spaces to be demonstrated best at the centre of the image and worst at the periphery of the image (see left). The reason for this phenomenon is that the central intravertebral disc(s) tend to be imaged in true profile while the divergence of the X-ray beam tends to not meet the peripheral lumbar vertebrae at right angles. This might appear to be unavoidable, but much can be done in terms of radiographic technique to overcome this problem.
The chiropractors largely avoid this problem by performing all spine radiography with the patient erect at 180cms. This is not always possible (e.g. trauma patients) requiring an alternate approach.
adapted from http://www.thegardensleepsystembynaturalform.com/images/man_back_new.gif
and http://www.made-in-china.com/image/2f0j00JCPTQLuWghqBM/X-Ray-Tube-CT-18-X762-.jpgnote- this image has been used for illustrative purposes and does not represent a radiographic lateral lumbar spine position.
When performing lateral lumbar spine radiography using the table bucky/IR, the patient should be positioned in the rolled lateral position and a careful assessment of the shape of the patient's lumbar spine should be made in this position. You are aiming to set the FFD/SID to a distance where the lumbar spine describes the arc of a circle centred at the focal spot.
I have heard of a radiographer who used a piece of string attached at the level of the focal spot of the X-ray tube and a pencil at the level of the patient's spine and moved the pencil though an arc to ensure that every spinous process was aligned with the arc of a circle centred at the focal spot. This is an extreme technique but, nevertheless, illustrates the principle.
If you are successful, you should produce an image like this (note that this image is collimated to include the thoraco-lumbar junction) The patient's body shape will provide significant clues as to the likely shape of the patient's lumbar spine in the rolled lateral position.
Successful FFD/SID Determination
Successful assessment of the curve of the patient's lumbar spine when combined with the other techniques described on this page can result in a lateral lumbar spine image that is both diagnostically adequate and aesthetically pleasing as shown below.
L5 Pars defects noted
Assess the AP view Before Performing the Lateral View
There can be considerable benefit in checking old lumbar spine imaging before starting an examination. There is no value in repeating the same error that was made during the previous lumbar spine X-ray examination. Equally, the AP/PA view from the current examination should be assessed prior to performing the lateral lumbar spine. In this case, the AP view demonstrated a mild scoliosis. A left lateral view will favour demonstration of the lower lumbar vertebrae and a right lateral position will favour the upper lumbar vertebrae.
Gall stones noted.
As would be expected, the left lateral position favours demonstration of the lower lumbar vertebra. If this was a follow-up examination of an L1 fracture, a right lateral would be expected to provide improved demonstration of the fracture.
Mattress edge artifact noted
Limiting Scatter Radiation- X-ray Beam Collimation
Based on anecdotal evidence, collimation of the X-ray beam within the patient's skin line posteriorly will result in a significant reduction in scatter radiation and a significant improvement in image quality. This will not always be possible, but should be considered an objective when performing lateral lumbar spine radiography. The use of lead shielding following the soft tissue line of the lumbar spine should be considered an adjunct to close collimation rather than a substitute for close collimation.
This lateral lumbar spine image demonstrates the collimation marks which largely fall within the patient's skin line posteriorly (arrows).
Limiting Scatter Radiation- Round Cone
This is a lateral lumbosacral junction X-ray image produced with a round cone. Round cones can be usefully employed where: the anatomy of interest is round in shape (i.e. skull); where the corners of an image provide no useful information; and/or where a department wishes to standardise the coning for a particular radiographic view.
The reduction in radiation dose to the patient is possibly greater than would be suggested by this image. It should be remembered that it is not an area of tissue that is saved from irradiation, it is a volume- the X-ray image is two dimensional, but the irradiated tissue is three dimensional.
Limiting Scatter Radiation- Lead Rubber
This is a lateral view image of the mid-upper lumbar vertebrae. The radiographer has utilised lead rubber(arrowed) which is 'leaning up against' the patients back to reduce scatter radiation.This is not a substitute for tight collimation of the primary X-ray beam and also has the disadvantage of producing an image that lacks aesthetic qualities.
Limiting Scatter Radiation- "Snake"
This is a lateral lumbar spine image. The radiographer has reduced scatter radiation using a lead snake (arrowed). The snake can be shaped to the contours of the patients skinline. The snake has the advantage of being made of solid lead sheeting (1mm) and so is effective in absorbing the high-exposure beam. It has the disadvantage of producing an image that lacks some aesthetic qualities.
Aluminium Filter Technique
This lateral lumbar spine radiograph was achieved with an aluminium filter attached to the Light Beam Diaphragm. The filter was positioned with its thickest end at the thoracic level. The effect of the filter is to cause a relative increase in the exposure to the L5S1 anatomy, thereby producing a more even optical density across the image.
The use of an aluminium filter for lateral lumbar spine radiography is advantageous in terms of efficiency and reduction in radiation dose to the patient. The radiographer in this case has potentially saved the patient from being exposed to a large radiation dose associated with a coned lateral L5S1 view.
Note that this is a radiograph not a digital image... a darkroom was involved!
The breathing exposure technique is usually associated with lateral thoracic spine radiography. The same technique can be employed for all torso spine plain film imaging.Horizontal Ray Lateral Lumbar Spine Technique
AP Lumbar Spine Projection
(short exposure time)
AP Lumbar Spine Projection
There is a crush fracture of the body of L2. The patient was referred for a surgical assessment and received pedicle screws to stabilise the fracture.
The radiographer set the kVp at 85 and the automatic exposure device determined the exposure mA and time. The exposure was made on arrested respiration. Note that there are bowel gas and diaphragmatic shadows overlying the spine.
The patient returned to the X-ray department following spinal surgery for post-operative imaging. The radiographer selected the following manual exposure factors
- 85 kVp
- 40 mA
- 2.0 sec
The long exposure time has resulted in blurring of the bowel gas, ribs and diaphragm. The spinal bony anatomy remains sharp. The patient was asked to hold still but remain breathing during the exposure. This technique should not result in an increase in the mAS used- the mA is reduced to match the increased exposure time.
The horizontal ray lateral technique is commonly employed in patients who are unable to roll into the lateral position and/or in patients who have a possibility of an unstable spinal injury.
This is a horizontal ray lateral lumbar spine image in a patient who was involved in a motor vehicle accident. A long exposure breathing technique has been employed. The results are comparable with a conventional rolled lateral lumbar spine technique. This is a cross-table lateral horizontal ray projection thoraco-lumbar spine . The patient is lying on a hard surface. This can be achieved in a variety of ways and has the advantage of reducing artifact from a soft mattress. One technique that radiographers' use is to transfer the patient onto the X-ray table and, when the supine imaging is completed, leave the transfer board under the patient when the patient is transferred back onto their bed/trolley/barouche. Horizontal ray Lateral lumbar spine with wedge fracture of L1. This is an extreme example of what can go wrong when performing lateral horizontal ray lumbar spine radiography. The patient is lying on a special inflatable mattress used for patients who will be lying in hospital for long periods. The osteoporotic vertebrae are of a similar density to the mattress material.
Thoraco-lumbar Spine- What does this term Imply?
When a patient is referred for radiography of the thoraco-lumbar spine, the inference is that imaging is required of the thoraco-lumbar junction. The vertebra that the referring doctor requires to be imaged may only be known to the referring doctor! The radiographer is sometimes required to make a reasoned judgement as to the intention of the referring doctor. This may range between a requirement for imaging of a known fracture (e.g. t12, L1) or the doctor's intention may be for imaging of considerably more of the thoracic and lumbar vertebrae (in which case the wrong examination was ordered). Speak to the patient about their history and, if still unsure, speak to the referring doctor.
This is what you might expect for a request for thoraco-lumbar spine in a patient with a known injury In cases where the referring doctor has requested thoracic and lumbar spine (as opposed to thoraco-lumbar spine) in a paediatric patient, it may be appropriated to collimate to include the entire torso spine in a single image.
Lateral Lumbosacral Junction Technique
Learning the radiographic technique for imaging the lateral projection of the lumbosacral junction can be a challenge at first. Some radiographers use a right-angle triangle technique for centring based around the position of the ASIS. L5S1 is usually at the level of the ASIS. If you are using a vertical beam (straight tube), this is a relatively easy centring task. The challenge then is in establishing the centrepoint in the other plane (anterior to posterior)- this is a matter of judgement and practise.
If you are using tube angulation (more commonly caudal), the centre point must be adjusted to suit.
The ideal technique for performing a lateral L5S1 is to not perform this view at all- include the lumbosacral junction on the lateral lumbar spine and use an aluminium filter to even out the image density. (see multiple examples on this page)
some patients will have dimples in their skin at the lumbosacral junction which can provide a guide to the position of the lumbosacral junction and the tube angle required (if any).
How do you know if it's Lateral?
An off-lateral lumbar spine can be identified by one of a number of signs:
- The twin peaks (white arrows) are the superior articulating processes of the vertebra. If the lateral lumbar spine is in a true lateral position, the superior articulating processes will be superimposed.
- The black arrows identify the postero-lateral aspects of the vertebral body (see below). They will similarly be superimposed when the patient is positioned in a true lateral position.
The Off-lateral Trap
AP Lumbar Spine Lateral Lumbar Spine Lateral Lumbo-sacral Junction This elderly lady presented to the Emergency Department with back pain following a fall. The AP lumbar spine image demonstrates no acute abnormality. The lateral lumbar spine image suggests a spondylolisthesis at L5S1 The coned lateral L5S1 image similarly suggests a spondylolisthesis at L5S1
The reporting Radiologists suspected that the apparent spondylolisthesis may be positional and requested a repeat lateral L5S1 view.
Repeat Lateral Lumbo-sacral Junction The repeat lateral L5S1 image confirms the radiologist's suspicion that the apparent spondylolisthesis at L5S1 was positional/projectional rather than a true pathology. This case demonstrates the need for diligence in ensuring that patients are in a true lateral position when performing lateral lumbar spine radiography.Case 2
Image 1. Poor Lateral Position Image 2. Better Lateral Position Image 3. Best Lateral Position This patient has had neutral, flexion and extension lateral lumbar spine radiography. He has a grade 2 spondylolisthesis and bilateral pars interarticularis defects (arrowed). The patient is rotated off true lateral and the demonstration of the L5S1 disc space is poor. This is an acceptable lateral L5S1 position but the lower facet joints are not superimposed. This is a very good lateral position. Note the clarity of demonstration of the bony anatomy and the clear demonstration of the pars interarticularis defects. Compare the demonstration of the bony anatomy and pathology with the first two images.
Compare the L4/5 disc space as demonstrated on the 3 images- this level provides a good illustration of how a good lateral position can provide an appreciation of a joint space and a poor position provides limited information.
This patient has had neutral, flexion and extension lateral lumbar spine radiography. He has a grade 2 spondylolisthesis and bilateral pars interarticularis defects (arrowed). The patient is rotated off true lateral and the demonstration of the L5S1 disc space is poor. This is an acceptable lateral L5S1 position but the lower facet joints are not superimposed.
Transitional Vertebra (Lumbarisations and Sacralisations)
There can be transitional vertebrae throughout the spinal column at the transition levels (i.e. cervico-thoracic, thoraco-lumbar, lumbosacral). For example, the seventh cervical vertebra can have an associated rib (cervical rib) affording it characteristics of a thoracic vertebra. There can be a 13th rib which will suggest the first lumbar vertebra has some thoracic spine characteristics. Some patients will demonstrate absence of the 12th ribs. It can be very difficult for the reporting radiologist to decide what to call a transitional vertebra- is it a lumbar vertebra with some sacral characteristics or is it a sacral vertebra with some lumbar characteristics? Where this can become a problem for the radiographer is in deciding whether you correctly performed a coned lateral L5S1 view when the first sacral vertebral has characteristics of L5.
As a guide, you could consider L5S1 to be at the level of the ASIS and transitional vertebra above this level to be sacralised lumbar vertrebra and vertebra below this level to be lumbarised sacral vertebra. Note that this is a guide only, and consideration should be given to the number of lumbar-like vertebra visible and the position of the 12th ribs.
When viewing the AP projection of the lumbar spine, note that the transverse processes of L4 are often orientated slightly cephalad- this can be a useful landmark in identifying lumbar levels.
adapted from Alex Maclennan, Radiologist, Royal Alexandra Hospital, Paisley, United Kingdom
This is one of those confusing transitional vertebra cases that defies a clear categorisation (left). There are 6 vertebra that demonstrate lumbar characteristics. The verterbra above the vertrebra annotated with "1" has associated ribs. Are these the 12th ribs or are these the 11th ribs with congenital absence of the 12th ribs?
Radiography of the thoracic vertebra to clarify the nature of lumbar transitional vertebra is not warranted unless this will change the management of the patient (unlikely)
Schematic presentation of the classification of
Lumbosacral Transitional Vertebrae according to Castellvi.
Type IV is not reproduced : it is
a mixture of type II and III.
adapted from Johannes L. BRON, Barend J. VAN ROYEN, Paul I. J. M. WUISMAN
The clinical significance of lumbosacral transitional anomalies
Acta Orthop. Belg., 2007, 73, 687-695
Unliateral transitional features on left
Castellvi has classified the lumbosacral transitional vertebrae as shown left.
Transitional Vertebrae Examples
This lateral lumbar spine image demonstrates 5 lumbar-like vertebrae below T12 (identified by associated ribs). This may not be a case of transitional vertabra. The L5 vertebra is however sited at a level that you would expect to see S1. Lateral L5S1 of same patient. Evidence of advanced degeneration of the lower 2 lumbar intervertebral discs and spondylolisthesis at L5S1. ? pars defects at L5.
The first sacral vertebra has some lumbar characteristics.
The Ring Apophysis
V.R. Yingling1, S.M. McGill2
THE RESPONSE OF THE INTERVERTEBRAL DISC, THE PARS INTERARTICULARIS AND THE POSTERIOR LIGAMENTS TO EXTERNAL ANTERIOR SHEAR LOADING
Outside of the true epiphyseal plates (of the vertebral body), a cartilaginous ring apophysis develops on the outer rings of the vertebral bodies. The ring apophysis does not contribute to the longitudinal growth of the vertebral body. By age 14 the ring apophysis begins to ossify, eventually fusing with the vertebral body by age 18. This appearance should not be confused with pathological appearance.
Daniel Kim, Randal Betz, Stephen Huhn, and Peter Newton, Surgery of the Pediatric Spine, 2008, p9
Venous Impression of the Basivertebral Veins
SilkeBecker and BronekBoszczyk, Balloon Kyphoplasty, 2008
The arrowed structures are the ostia of the basivertebral veins
How Much Wedging is normal?
|"Vertebral body height: |
In the normal spine from T11 to L2, the vertebral segments are typically wedge-shaped anatomically. This normal appearance will present with approximately 10 percent to 15 percent or 1-3 mm less anterior body height compared to posterior body height. A common pitfall related to this is when normal morphology is confused with compression deformity. Loss of height at the anterior aspect of the vertebral body is the most common radiographic finding for compression fractures.Typically, disc material will remain intact and there will be no apparent loss of intervertebral disc height.In older, healed compression deformities, there is typically anterior wedge deformity greater than 15 percent. Some authors have stated that the degree of loss of height must exceed 30 percent to be detected on plain film."
This is a normal lateral lumbar spine (except for pars defects at L5). Note the normal slight anterior wedging of the vertebral bodies at T11 and T12.
"Schmorl's nodes are protrusions of the cartilage of the intervertebral disc through the vertebral body endplate and into the adjacent vertebra. The protrusions may contact the marrow of the vertebra, leading to inflammation.
A limbus vertebra is closely related to a Schmorl node"
Behrang Amini, MD/PhD
adapted from Theodore E. Keats, MD in http://www.emedmag.com/html/pre/xray/xray/1204.asp
"The anterior defect of L1 in this patient is a limbus vertebra, and that of L2 is a classic Schmorl's node. The limbus vertebra is the result of anterior protrusion of the intervertebral disk beneath the ring apophysis of the growing vertebral body, which prevents union of the two structures. The Schmorl's node is the product of intrabody herniation of the nucleus pulposus."Theodore E. Keats, MD in http://www.emedmag.com/html/pre/xray/xray/1204.asp
This 20 year old female patient presented to the Emergency Department with low back pain. The patient had a history of involvement in a motor vehicle accident (MVA) 24 hours prior.
This is an AP lumbar spine image taken with a long exposure time using a film/screen technique. This is a lateral lumbar spine using a long exposure time and long ffd on film/screen . In addition, an aluminium wedge filter has been placed to reduce the exposure to all but L5 and lower. There is a defect of the L5 pars interarticularis- probably bilateral (white arrow). The coned lateral L5S1 image supports the diagnosis of a L5 pars interarticularis defect.
Elastic artifact noted
The referring doctor reviewed the images and referred the patient for CT lumbar spine imaging in lieu of obliques of the lower lumbar spine. The pars defects were shown to be well corticated suggesting that they were old/congenital.
This 24 year old female patient presented to the Emergency Department following acute onset of low back pain. The patient has a history of involvement in a motor vehicle accident (MVA) 5 years ago.
The lateral lumbar spine demonstrates pars interarticularis defects at L3 (film/screen technique circa 1997) The coned LPO oblique view demonstrates a pars interarticularis defect on the right Similarly, the left oblique demonstrates a pars interarticularis defect.
The pars defects in this case were considered to be non-acute.
This 46 year old male presented to the Emergency Department with back pain following lifting a heavy object. He was referred for radiography of the lumbar spine.
This is an AP lumbar spine image taken with a breathing long exposure time using a CR technique. There is no obvious abnormality demonstrated. This is a CR lateral lumbar spine image using a long exposure time and long SID with breathing technique. There is some loss of vertebral body height anteriorly at L1. There is also a suggestion of loss of vertebral body height posteriorly at L5. A defect in the pars interarticularis is seen at L4 with increased sclerosis and a lucent line (arrowed). The pars defects were noted by the radiographer who proceeded to perform oblique views of the area of interest. There is abnormal irregular bone growth associated with the right pars interarticularis and a lucent corticated defect suggesting an old fracture (arrowed). There is a lucent defect with corticated margins in the left pars interarticularis (arrowed) suggesting an old injury.
This patient was referred on multiple occasions for follow-up imaging of a L1 crush fracture.
This is a lateral thoracolumbar spine position. The AEC devise was selected resulting in slight underexposure for the area of interest (L1). This is caused by the lungfields partially overlying the centre AEC chamber. The image is degraded by scatter radiation associated with failure to collimate adequately. The exposure was made on inspiration. Similar projection on expiration. The AEC has achieved a better result on expiration. The image is degraded (low contrast) associated with scatter radiation. The exposure was made on expiration. The radiographer has selected a manual exposure with an exposure time of 1.6 seconds. The breathing technique has resulted in blurring (movement unsharpness) of the soft tissues and associated improved visualisation of the L1 fracture. The radiographer has partially collimated within the patient's skinline resulting in a reduction in scatter radiation and associated increased contrast.
...back to the Applied Radiography home page
Latest page update: made by AndyC
, Feb 8 2010, 12:47 AM EST
(about this update
About This Update
Moved from: Oblique Lumbar Spine Technique
No content added or deleted.
- complete history)
Keyword tags: None
More Info: links to this page